Turnkey sanitary-grade water systems engineered for premium bottled beverages, dairy processing, craft brewing, natural botanical extraction, and Clean-in-Place (CIP) final rinse. Built to strict EHEDG and FDA food-contact standards.

In beverage bottling, dairy processing, and food extraction, process water must be completely free of chlorine byproducts, trihalomethanes, iron scale, and biological spores without altering sensory flavor profiles.
| PARAMETER | GUARANTEED PARAMETER | QUALITY COMPLIANCE STANDARD |
|---|---|---|
| Total Aerobic Bacteria | < 10 CFU / mL (0 in final) | Continuous Ozone / UV In-line |
| Coliforms & E. Coli | 0 CFU / 100 mL (Undetectable) | Zero biological contamination |
| Conductivity (25°C) | < 1.0 – 5.0 µS / cm (Adjustable) | Taste balance & mineral profiling |
| Chlorine & Chloramines | < 0.01 mg / L (Zero) | Carbon bed catalytic dechlorination |
| Turbidity (NTU) | < 0.1 NTU | Crystal clear product brilliance |
| Wetted Piping Material | AISI 316L (Ra ≤ 0.6 µm) | Electro-polished sanitary standard |
All process headers and distribution loops are built with automatic orbital-welded stainless steel 316L, fully passivated and boroscope inspected to eliminate stagnant corners where bacteria can breed.
Ozone contact systems provide rapid residual microbial kill in buffer tanks, while high-dose 254nm ultraviolet de-ozonators eliminate ozone prior to product blending without chemical neutralizing agents.
Seamlessly integrates with automated CIP chemical washing stations and 85°C hot water thermal sanitization loops with programmable timed cycles and temperature validation sensors.
Combining heavy-duty mechanical pre-filtration, double-pass reverse osmosis, and multi-barrier ozone/UV disinfection.
Removes municipal chlorine odors, sediment, iron, and suspended solids.
Desalinates salts, heavy metals, pesticides, and microbial contaminants.
Provides sustained microbial kill and custom mineral adjustment for beverages.
Delivers water to filling carousels and CIP wash lines with zero stagnation.
Engineered for high-volume automated bottling, canning, and aseptic mixing processes.
Multi-barrier filtration providing crystal-clarity, sterile preservation, and balanced mineral mouthfeel for glass and PET bottling.
Consistent low-hardness brewing water allowing brewmasters to custom-profile sulfate/chloride ratios for Pilsners, Ales, and spirits dilution.
Aseptic pure water for milk powder reconstitution, oat/soy milk extraction, and high-temperature pasteurizer feed with zero scaling.
Demineralized pure water solvents for ultrasonic and vacuum extraction of herbal teas, citrus essential oils, and functional food nutrients.
All wetted stainless steel 316L, EPDM/PTFE sanitary gaskets, and filter housings come with complete FDA/3-A food-contact conformity certificates and mill test reports (MTR).
Request Food-Grade Compliance SpecTell us your hourly bottling rate, required water profile, and incoming raw water source. Our food-grade engineering team will provide a comprehensive PFD and budgetary proposal within 24 hours.
Provide your production capacity and beverage type to receive equipment sizing and cost models.